Tip Loader - A new way pipette tip refill, save time, save money, reduce waste 

Can I Autoclave ART Pipette Tips

Posted on April 9, 2022 by Pipette Tip 
 Tip Loader For Pipette Tip Refill  
tip loader for pipette tip rack loader
For Laboratory use
Tip Loader For Pipette Tip Refill 

ART pipette Tips are polypropylene-based tips that are designed to be reusable multiple times. They can be sterilized at 121 degC for 15 to 20 minutes to prevent contamination. They are not suitable for autoclaving because they are prone to overtightening and contaminating the sample. If you are unsure of whether or not you should autoclave the tips, you should follow these steps.

Before you begin autoclaving your pipette tips, check the manufacturer's instructions for proper autoclaving. Most manufacturers suggest that you hold pipettes at 121degC for 20 minutes or less. Overautoclaving may lead to warping. For these reasons, you should always wash and sterilize pipette tips immediately after use. However, you should not autoclave them more than once. You should read the manual to make sure that you don't overheat the tips. You can use distilled water to sterilize the tips. When autoclaving, the temperature should be at least 80 degrees Celsius. You can try to avoid overheating by using a sterilizing spray. You can also use a cleaning solution to clean the tips before using them.

Autoclaving art pipette tips is an effective way to sterilize them. The process removes air from the tip by either using an evacuation pump or downward steam displacement. During autoclaving, you should rinse the tips with distilled water and allow them to cool before drying. This will ensure that your pipette tips are free from contamination. You can even use the autoclaved tips for making your own jewelry.

Alternatively, you can use a solution to autoclave art pipette tips. Simply spray the solution on your tip, and let it sit in the sterilizer for ten to twelve minutes. After autoclaving, you should always rinse the tips with distilled water to make sure they are completely clean and sterilized. Then, dry them thoroughly before using them. You can also reuse them by simply putting them in a zip-lock bag.

While you can autoclave art pipette tips, you should follow the manufacturer's instructions to ensure that you do not warp them. It is possible to autoclave pipette the tips in two different ways. If you're using a plastic tip, you can spray the solution on the tip and leave it for 10 or 12 minutes. Then, you should gently rinse the tips with distilled water.

You can autoclave art pipette tips. This method is suitable for all types of pipes. Unless you're using disposable ones, you can always opt for a disposable version. These are also known as micropipette. The best way to sterilize them is to spray the solution directly on the tip. If you want to autoclave the tips, you should make sure they are in a ziplock bag.


You can autoclave art pipette tips by spraying the tips with distilled water. For the best results, you should autoclave them according to the manufacturer's instructions. After autoclaving, make sure to rinse the tips thoroughly with distilled water. Then, let them dry before you use them again. If you don't want to use alcohol, you can use a sterile spray bottle to sterilize them.

In case you're using disposable pipette tips, you can autoclave them. You can spray or wipe them with distilled water to sterilize them. If you're using disposable tips, make sure to dry them afterward. This is the only way to avoid a ruined pipette tip. If you're using disposable tips, you'll want to autoclave them after each use.

When it comes to autoclaving, it's important to avoid putting materials on the tips during the process. In addition, you should never put liquids on your pipette tips while they're autoclaved. This can lead to contamination. To prevent this, you should never use the tips that have been used in the process. You should rinse the tips carefully before using them.

Hot Sales
Tip Loader
For laboratory use
Pipette Tip Sorting Device
For tips manufacturer

Contact Us

Write Us Today
Reply Whitin 8 Hours


Tip Loader is pipette tip sorting device for bulk pipette tip refill into empty rack.
We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Privacy Policy