Tip Loader - A new way pipette tip refill, save time, save money, reduce waste 

How to Autoclave Pipette Tips

Posted on April 25, 2022 by Pipette Tip 
 Tip Loader For Pipette Tip Refill  
tip loader for pipette tip rack loader
For Laboratory use
Tip Loader For Pipette Tip Refill 

Depending on the manufacturer, autoclaving pipette tips can save laboratories up to 90 percent on their consumables budget. To autoclave these tips, first press the operating button to shut down the device. Next, you should dip the tip into a sterile solution and then release the operating button to autoclave the tip. After the autoclaving cycle is complete, you should open the lid and remove the pipette. Once autoclaved, the tip should be dry and should not contain any moisture or other materials.

To autoclave pipette tips, you should first remove any old tips from the device. You can reuse the tip boxes for new autoclaves. This makes loading the autoclave easier and allows you to use the autoclaved tips right away. Another option is to autoclave glass beakers, which are easy to handle and use afterward. This method requires you to put the tips into the tray using a locking tab, which you can hold up with your free hand.

After the autoclave, pipettes should be cleaned thoroughly. After cleaning, pipette tips should be allowed to air-dry completely. To store them for future use, wrap them in aluminum foil and secure them in place with tape. For automatic sterilization, you can use a gravity autoclave. The cycle should last one to 15 hours. Once sterilized, remove the tips from the machine and place them in a biohazard-lab-approved plastic bag.

Once you have finished autoclaving your pipette tips, you can use them immediately. This method is easier than ever and you can even use the tips directly from the autoclaved boxes. Just be sure to keep an eye out for contaminated pipes, and keep your fingers safe! If you have questions, consult a professional in the field for more information. The answer to the question "how to autoclave pipette tips" will be simple: follow the manufacturer's instructions.

It is also possible to autoclave tips without removing them from the pipette. Before autoclaving, you should always make sure they are free from contaminants. Some types of plastic can melt in the autoclave chamber. After autoclaving, you should check the plastic bags for tears and punctures. If your pipette tips are not sterile, you might need to clean them before use.


Once you have autoclaved your pipette tips, you can use them straight from the box. Moreover, you can reuse old ones when needed. If you don't have access to an autoclaved tip box, you can purchase a new one from a shop. You can also buy disposable plastic pipette tips for laboratory use in the same way. You can use them for your experiments.

It is important to note that pipette tips can be very hot. Using a glass autoclave can help prevent these, but you should be sure to wash the tip before putting it into the autoclave. This is the easiest way to sterilize pipette tips, as you don't need to wash them. If you are using a plastic autoclave, you can put them into the glass beaker and cover the cylinder with aluminum foil.

Once you have the appropriate volume of liquid, the autoclave will be completed in 20 minutes. The tips will be sterile, as long as they can tolerate high temperatures. Unless they are contaminated, they won't be useful for research. Once you've autoclaved a pipette, you can wipe the tip and autoclave it. Then, you'll be able to safely use it again.

Autoclaving pipette tips is an essential step for lab work. The tips should be filled with a nominal volume of liquid. When the lab pipette tip is autoclaved, it will be sterile for as long as the time you've set for the process is necessary. Aside from this, it will also ensure the cleanliness of the reusable instrument. It is very important to check the contents of the autoclave before you begin your procedure.

Hot Sales
Tip Loader
For laboratory use
Pipette Tip Sorting Device
For tips manufacturer

Contact Us

Write Us Today
Reply Whitin 8 Hours


Tip Loader is pipette tip sorting device for bulk pipette tip refill into empty rack.
We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Privacy Policy